.png)
Spring Applied Brake - 14.458
The DC Spring Applied brake unit designed to perform holding as well as emergency stopping functions (Normally On), making it particularly well- suited for brake motor applications.
These brakes are electromagnetically actuated single disk with two friction surfaces. The braking power is applied by means of compression springs. The braking torque is generated in the no power or in event of power failure condition. These brakes have torque up to 5000 Nm. Brakes are available in various versions as per application need. Special versions like brake with micro switch, tacho mounting provision, with centering flange etc. can be also supplied. Brake also available for low temperature (-40°C) application. These brakes can be used as Press Brake, Lift Brake, Elevator Brake and Hoist Brake.
Features:-
- Fail safe
- Low Rotor Inertia
- Torque in 4 to 5000 NM.
- Manual Release
- Non Asbestos friction linings+
- German low-wear non asbestos lining available on request
- Dust Protecting Seal
- Compact Robust Unit
- Adjustable Brake Torque
- Optimized Torque Steps
- Simple Wear Adjustment
- High Operating Frequency & Reliability Fast Switching Times
- Salient Features Stationary Field (No Slip Rings)
- Two Friction Surfaces Consistent Operating Characteristics
- All Metal Parts Protected From Rust
- Coil With Class 'F' Insulation No Restrictions On Mounting Positions
- Residual -Free
Applications:-
- Brake motors
- Cranes and Hoists
- Servo motors
- Machine tools
- Packaging Machines
- Golf carts
- Presses
- Printing machinery
- Steel Plants
- Industrial washing machines
- Tyre making machinery
- Hospital beds
- Robotics
- Tower cranes
- Goods lifts
- Construction machinery
- Coil winding machinery
- X- ray machines
- Wheel chair
- Wire drawing machinery
- Battery operated electric vehicles
- Textile machinery